Datasheet

Command Line Interface Reference 8-35
AP5131>admin(network.wan)> show
Description:
Displays the AP-5131 WAN port parameters.
Syntax:
Example:
admin(network.wan)>show
WAN Interface : enable
WAN DHCP Client Mode : disable
IP address : 0.0.0.0
Network Mask : 0.0.0.0
Default Gateway : 10.10.1.1
Primary DNS Server : 0.0.0.0
Secondary DNS Server : 0.0.0.0
WAN IP 2 : disable
WAN IP 3 : disable
WAN IP 4 : disable
WAN IP 5 : disable
WAN IP 6 : disable
WAN IP 7 : disable
WAN IP 8 : disable
PPPoE Mode : enable
PPPoE User Name : JohnDoe
PPPoE Password : *******
PPPoE keepalive mode : enable
PPPoE Idle Time : 600
PPPoE Authentication Type : chap
admin(network.wan)>
For an overview of the AP-5131 WAN configuration options available using the applet (GUI), see Configuring WAN Settings on page
5-13.
show Shows the general IP parameters for the WAN port along with settings for the WAN interface..