Datasheet

Command Line Interface Reference 8-17
AP5131>admin(network.lan.vlan)> show
Description:
Displays current VLAN parameter settings the AP-5131. These parameters are defined with the set command.
Syntax:
Example:
admin(network.lan.vlan)>show name
-----------------------------------------------------------------------------
Index VLAN ID VLAN Name
-----------------------------------------------------------------------------
1 1 VLAN_1
2 2 VLAN_2
3 3 VLAN_3
4 4 VLAN_4
admin(network.lan.vlan)>show config
Management VLAN Tag :1
Native VLAN Tag :2
WLAN :Lobby
mapped to VLAN :VLAN 2
VLAN Mode :static
admin(network.lan.vlan)>show wlan
-----------------------------------------------------------------------------
WLAN Name ESSID Radio VLAN Security Policy QOS Policy
-----------------------------------------------------------------------------
Lobby 101 11a 2 Open Voice
For information on displaying the AP-5131 VLAN screens using the applet (GUI), see Configuring VLAN Support on page 5-5.
show name Displays the existing list of AP-5131 VLAN names.
config Shows the target VLAN configuration.
wlan Displays the WLAN summary list.