Datasheet

AP-5131 Access Point Product Reference Guide
7-6
2. Refer to the Information field to view the following AP-5131 device address information:
3. Refer to the Received field to view data received over the AP-5131 LAN port.
HW Address The Media Access Control (MAC) address of the AP-5131. The
MAC address is hard coded at the factory and cannot be changed.
IP Address The Internet Protocol (IP) addresses for the
AP-5131 LAN port.
RX Packets RX packets are data packets received over the
AP-5131 LAN port.
The number is a cumulative total since the LAN connection was
last enabled or the
AP-5131 was last restarted. To begin a new
data collection, see Configuring System Settings on page 4-2.
RX Bytes RX bytes are bytes of information received over the LAN port. The
value is a cumulative total since the LAN connection was last
enabled or the
AP-5131 was last restarted. To begin a new data
collection, see Configuring System Settings on page 4-2.
RX Errors RX errors include dropped data packets, buffer overruns, and frame
errors on inbound traffic. The number of RX errors is a total of RX
Dropped, RX Overruns and RX Carrier errors. Use this information
to determine performance quality of the current LAN connection.