Datasheet

AP-5131 Access Point Product Reference Guide
7-4
4. Refer to the Transmitted field to reference data received over the AP-5131 WAN port.
RX Errors RX errors include dropped data packets, buffer overruns, and frame
errors on inbound traffic. The number of RX errors is a total of RX
Dropped, RX Overruns and RX Carrier errors. Use this information
to determine performance quality of the current WAN connection.
RX Dropped The RX Dropped field displays the number of data packets that fail
to reach the WAN interface. If this number appears excessive,
consider a new connection to the device.
RX Overruns RX overruns are buffer overruns on the WAN connection. RX
overruns occur when packets are received faster than the WAN
port can handle them. If RX overruns are excessive, consider
reducing the data rate, for more information, see Configuring the
802.11a or 802.11b/g Radio on page 5-38.
RX Frame The RX Frame field displays the number of TCP/IP data frame
errors received.
TX Packets TX packets are data packets sent over the WAN connection. The
displayed number is a cumulative total since the WAN interface
was last enabled or the
AP-5131 was last restarted. To begin a
new data collection, see Configuring System Settings on page 4-2.
TX Bytes TX bytes are bytes of information sent over the WAN connection.
The displayed number is a cumulative total since the WAN
interface was last enabled or the
AP-5131 was last restarted. To
begin a new data collection, see Configuring System Settings on
page 4-2.
TX Errors TX errors include dropped data packets, buffer overruns, and carrier
errors on outbound traffic. The displayed number of TX errors is the
total of TX Dropped, TX Overruns and TX Carrier errors. Use this
information to re-assess
AP-5131 location and transmit speed.
TX Dropped The TX Dropped field displays the number of data packets that fail
to get sent from the WAN interface.
TX Overruns TX overruns are buffer overruns on the WAN connection. TX
overruns occur when packets are sent faster than the WAN
interface can handle. If TX overruns are excessive, consider
reducing the data rate, for more information, see Configuring the
802.11a or 802.11b/g Radio on page 5-38.