Datasheet

Configuring Access Point Security
6-35
3. If a VPN tunnel has been added to the list of available AP-5131 tunnels, use the VPN Tunnel
Config field to optionally modify the tunnel’s properties.
Key Exchange Type The Key Exchange Type column lists the key exchange type for
passing keys between both ends of a VPN tunnel. If Manual Key
Exchange is selected, this column displays Manual. If Auto (IKE)
Key Exchange is selected, the field displays Automatic.
Default Gateway
Displays the WAN interface's default gateway IP address.
Tunnel Name Enter a name to define the VPN tunnel. The tunnel name is used to
uniquely identify each tunnel. Select a name best suited to that
tunnel’s function so it can be selected again in the future if required
in a similar application.
Local WAN IP Enter the WAN’s numerical (non-DNS) IP address in order for the
tunnel to pass traffic to a remote network.
Remote Subnet Specify the numerical (non-DNS) IP address for the Remote Subnet.
Remote Subnet Mask Enter the subnet mask for the tunnel’s remote network for the
tunnel. The remote subnet mask is the subnet setting for the
remote network the tunnel connects to.
Remote Gateway Enter a numerical (non-DNS) remote gateway IP address for the
tunnel. The remote gateway IP address is the gateway address on
the remote network the VPN tunnel connects to.
Remote Subnet Mask Enter a numerical (non-DNS) remote gateway IP address for the
tunnel. The remote gateway IP address is the gateway address on
the remote network the VPN tunnel connects to.
Manual Key Exchange Selecting Manual Key Exchange requires you to manually enter
keys for AH and or ESP encryption and authentication. Click the
Manual Key Settings button to configure the settings.
Manual Key Settings Select Manual Key Exchange and click the Manual Key
Settings button to open a screen where AH authentication and
ESP encryption/authentication can be configured and keys entered.
For more information, see Configuring Manual Key Settings on
page 6-36.