Datasheet

AP-5131 Access Point Product Reference Guide
6-34
2. Use the VPN Tunnels field to add or delete a tunnel to the list of available tunnels, list
tunnel network address information and display key exchange information for each tunnel.
Add Click Add to add a VPN tunnel to the list. To configure a specific
tunnel, select it from the list and use the parameters within the
VPN Tunnel Config field to set its properties.
Del Click Del to delete a highlighted VPN tunnel. There is no
confirmation before deleting the tunnel.
Tunnel Name The Tunnel Name column lists the name of each VPN tunnel on
the
AP-5131.
Remote Subnet The Remote Subnet column lists the remote subnet mask for each
tunnel. The remote subnet mask is the subnet setting for the
remote network the tunnel connects to.
Remote Gateway The Remote Gateways column lists a remote gateway IP address
for each tunnel. The numeric remote gateway is the gateway IP
address on the remote network the VPN tunnel connects to. Ensure
the address is the same as the WAN port address of the target
gateway AP or switch.