Datasheet

AP-5131 Access Point Product Reference Guide
6-32
3. Configure the Firewall Rules field as required add, insert or delete firewall rules into the
list of advanced rules.
Inbound or Outbound Select Inbound or Outbound from the drop-down menu to specify
if a firewall rule is intended for inbound traffic to an interface or
outbound traffic from that interface.
Add Click the Add button to insert a new rule at the bottom of the table.
Click on a row to display a new window with configuration options
for that field.
Insert Click the Insert button to insert a new rule directly above a
selected rule in the table. Clicking on a field in the row displays a
new window with configuration options.
Del (Delete) Click Del to remove the selected rule from the table. The index
numbers for all the rows below the deleted row decrease by 1.
Move Up Clicking the Move Up button moves the selected rule up by one
row in the table. The index numbers for the affected rows adjust to
reflect the new order.
Move Down Clicking the Move Down button moves the selected rule down by
one row in the table. The index numbers for the affected rows
adjust to reflect the new order.
Index The index number determines the order firewall rules are executed.
Rules are executed from the lowest number to the highest number.
Source IP The Source IP range defines the origin address or address range
for the firewall rule. To configure the Source IP range, click on the
field. A new window displays for entering the IP address and range.
Destination IP The Destination IP range determines the target address or
address range for the firewall rule. To configure the Destination IP
range, click on the field. A new window displays for entering the IP
address and range.
Transport Select a protocol from the drop-down list. For a detailed description
of the protocols available, see Available Protocols on page 6-30.