Datasheet

Configuring Access Point Security
6-27
5. Click Apply to save any changes to the Firewall screen. Navigating away from the screen
without clicking the Apply button results in all changes to the screens being lost.
6. Click Undo Changes (if necessary) to undo any changes made. Undo Changes reverts the
settings displayed on the Firewall screen to the last saved configuration.
7. Click Logout to securely exit the AP-5131 Symbol Access Point applet. A prompt displays
confirming the logout before the applet is closed.
6.10.1 Configuring LAN to WAN Access
The AP-5131 LAN can be configured to communicate with the WAN side of the AP-5131. Use the LAN
to WAN Access screen to allow/deny access to the AP-5131 WAN protocols, specify names and
properties for existing protocols and enable pre-configured protocols (FTP, TFTP, Telnet ect.).
To configure AP-5131 subnet access:
1. Select Network Configuration -> Firewall -> LAN to WAN Access from the AP-5131
menu tree.
Max Header Length Use the Max Header Length field to set the maximum allowable
header length (at least 256 bytes).
Max Headers Use the Max Headers field to set the maximum number of
headers allowed (12)