Datasheet

AP-5131 Access Point Product Reference Guide
5-48
The information in the AP-5131 Router Table is dynamically generated from settings applied
on the WAN screen. The destination for each subnet is its IP address. The subnet mask (or
network mask) and gateway settings are those belonging to each subnet. Displayed
interfaces are those associated with destination IP addresses. To change any of the network
address information within the WAN screen, see Configuring WAN Settings on page 5-13.
3. Use the User Defined Routes field to add or delete static routes.
The User Defined Routes field allows the administrator to view, add or delete internal static
(dedicated) routes. Internal static routes are dedicated routes for data that travels from the
WAN, through the AP-5131, and to a specified location.
a. Click the Add button to create a new table entry.
b. Highlight an entry and click the Del (delete) button to remove an entry.
c. Specify the destination IP address, subnet mask, and gateway information for the
internal static route.
d. Select an enabled subnet from the Interface(s) column’s drop-down menu to complete
the table entry. Information in the Metric column is a user-defined value (from 1 to
65535) used by router protocols to determine the best hop routes.
4. Click the Apply button to save the changes.
5. Click Logout to securely exit the AP-5131 Symbol Access Point applet. A prompt displays
confirming the logout before the applet is closed.