Datasheet

AP-5131 Access Point Product Reference Guide
5-42
5. Refer to the Beacon Settings field to set the radio beacon and DTIM intervals.
Set RF QoS Click the Set RF QoS button to display the Set RF QOS screen to
set QoS parameters for the AP-5131 radio. This setting should not
be confused with the QoS configuration screen used for a WLAN.
The Set RF QoS screen initially appears with default values
displayed.
Configure the CW min and CW max (contention window), AIFSN
(Arbitrary Inter-Frame Space Number) and TXOPs Time for each
Access Category. These are the QoS policies for the 802.11a or
802.11b/g radio, not the QoS policies configured for the WLAN (as
created or edited from the Quality of Service Configuration
screen). Click the Set Default Values button to restore factory
default CW, AIFSN and TXOPs values to the Set RF QoS screen.
Click OK to implement the selected QoS values and return to the
802.11a or 802.11b/g radio configuration screen. Clicking Cancel
reverts the screen to the last saved configuration.