Datasheet

AP-5131 Access Point Product Reference Guide
5-32
a new policy can be created or an existing policy can be modified using the New QoS Policy or Edit
QoS Policy screens. Once new policies are defined, they are available for use within the New
WLAN or Edit WLAN screens to assign to specific WLANs based on MU interoperability
requirements.
Symbol recommends using the New QoS Policy and Edit QoS Policy screens strategically to name and
configure QoS policies meeting the requirements of the particular WLANs they may map to. However,
be careful not to name policies after specific WLANs, as individual QoS policies can be used by more
than one WLAN. For detailed information on assigning QoS policies to specific WLANs, see Creating/
Editing Individual WLANs on page 5-24.
To configure QoS policies:
1. Select Network Configuration -> Wireless -> QoS from the AP-5131 menu tree.
The Quality of Service Configuration screen displays with existing QoS policies and their
current WLAN (if mapped to a WLAN).
NOTE When the AP-5131 is first launched, a single QoS policy (default) is
available and mapped to WLAN 1. It is anticipated additional QoS policies
will be created as the list of WLANs grows.