Datasheet

AP-5131 Access Point Product Reference Guide
5-20
3. Click Apply to save any changes to the NAT, 1 to Many Mappings and Port Forwarding
screens. Navigating away from the screen without clicking the Apply button results in all
changes to the screens being lost.
4. Click Undo Changes (if necessary) to undo any changes made. Undo Changes reverts the
settings displayed on the NAT screen to the last saved configuration.
5. Click Logout to securely exit the AP-5131 Symbol Access Point applet. A prompt displays
confirming the logout before the applet is closed.
5.2.1.1 Configuring Port Forwarding
Use the Port Forwarding screen to configure port forwarding parameters for inbound traffic from
the associated WAN IP address.
To configure port forwarding for the AP-5131:
1. Select Network Configuration -> WAN -> NAT from the AP-5131 menu tree.
2. Click on the Port Forwarding button within the Inbound Mappings area.
Outbound Mappings When 1 to 1 NAT is selected, a single IP address can be entered in
the Outbound Mappings area. This address provides a 1 to 1
mapping of the WAN IP address to the specified LAN IP address.
When 1 to Many is selected, the Outbound Mappings area
displays LAN. If none is selected, The Outbound Mappings area is
blank.
Inbound Mappings When 1 to 1 or 1 to Many is selected, the Inbound Mappings
option displays a Port Forwarding button.
Port Forwarding Click the Port Forwarding button to display a screen of port
forwarding parameters for inbound traffic from the associated
WAN IP address. for information on configuring port forwarding,
see Configuring Port Forwarding on page 5-20.