Datasheet

Network Management
5-13
4. To optionally delete a type filtering selection from the list, highlight the packet type and click
the Delete button.
5. Click Apply to save any changes to the Ethernet Type Filter Configuration screen. Navigating
away from the screen without clicking Apply results in all changes to the screens being lost.
6. Click Cancel to securely exit the Ethernet Type Filter Configuration screen without saving
your changes.
7. Click Logout within the Ethernet Type Filter Configuration screen to securely exit the
AP-5131 Symbol Access Point applet. A prompt displays confirming the logout before the
applet is closed.
5.2 Configuring WAN Settings
A Wide Area Network (WAN) is a widely dispersed telecommunications network. The AP-5131
includes one WAN port. The AP-5131 WAN port has its own MAC address. In a corporate
environment, the WAN port might connect to a larger corporate network. For a small business, the
WAN port might connect to a DSL or cable modem to access the Internet.
Use the WAN screen to set the WAN IP configuration and Point-to-Point Protocol over Ethernet
(PPPoE) parameters.
To configure WAN settings for the AP-5131:
1. Select Network Configuration -> WAN from the AP-5131 menu tree.