Datasheet

System Configuration
4-37
Configure the Update Firmware field as required to set a filename and target firmware file
upload location for manual firmware updates.
4. Specify the name of the target firmware file within the Filename field.
5. If the target firmware file resides within a directory, specify a complete path for the file
within the Filepath(optional) field.
6. Enter an IP address for the FTP or TFTP server used for the update. Only numerical IP address
names are supported, no DNS can be used.
7. Use the drop-down menu to specify the FTP or TFTP server's location. The server can reside
on the WAN or on the LAN.
8. Select either the FTP or TFTP button to define whether the firmware file resides on a FTP or
TFTP server.
9. Set the following FTP or TFTP parameters:
•Username - Specify a username for the FTP server login.
•Password - Specify a password for FTP server login. Default is symbol.
10. Click the Perform Update button to initiate the update. Upon confirming the firmware
update, the AP reboots and completes the update.
11. After the AP reboots, return to the Firmware Update screen. Check the Status field to verify
whether the firmware update was successful. If an error occurs, one of the following error
messages will display:
FAIL: auto fw update check
FAIL: network activity time out
FAIL: firmware check
FAIL: exceed memory limit
FAIL: authentication
FAIL: connection time out
Interface Use the Interface drop-down menu to select the WAN or LAN
interface to be monitored by the
AP-5131 for version updates if the
Enable Automatic Firmware Update and/or Enable
Automatic Configuration Update checkboxes are selected.
NOTE Click Apply to save the settings before performing the firmware update.
The user is not able to navigate the AP-5131 user interface while the
firmware update is in process.