Datasheet

System Configuration
4-35
Refer to Importing/Exporting Configurations on page 4-30 for instructions on exporting the
AP-5131’s current configuration to have it available after the firmware is updated.
2. Select System Configuration - > Firmware Update from the AP-5131 menu tree.
3. Configure the DHCP Options field to enable automatic firmware and/or configuration file
updates when the selected LAN or WAN interface detects an updated file.
DHCP options are used for out-of-the-box rapid deployment for Symbol wireless products.
The following are the two DHCP options available on the AP-5131:
• Enable Automatic Firmware Update
• Enable Automatic Configuration Update
These options can be used to update newer firmware and configuration files on the AP-5131
through either the LAN or WAN interface. The AP-5131 uses DHCP Vendor Specific Option
43 with the following options embedded within it: