Datasheet

AP-5131 Access Point Product Reference Guide
4-32
3. Configure the HTTP Import/Export field to import/export AP-5131 configuration settings
using HTTP.
Filename Specify the name of the configuration file to be written to the FTP
or TFTP server.
Server IP Enter the
numerical (non DNS name) IP address of the
destination FTP or TFTP server where the configuration file is
imported or exported.
Filepath (optional) Defines the optional path name used to import/export the target
configuration file.
FTP Select the FTP radio button if using an FTP server to import or export
the configuration.
TFTP Select the TFTP radio button if using an FTP server to import or
export the configuration.
Username Specify a username to be used when logging in to the FTP server. A
username is not required for TFTP server logins.
Password Define a password allowing access to the FTP server for the import
or export operation.
Import Configuration Click the Import Configuration button to import the configuration
file from the server with the assigned filename and login
information. The system displays a confirmation window indicating
the administrator must log out of the
AP-5131 after the operation
completes for the changes to take effect. Click Yes to continue the
operation. Click No to cancel the configuration file import.
Export Configuration Click the Export Configuration button to export the configuration
file from the server with the assigned filename and login
information. When the file is exported, all field parameters are
exported, including LAN and WAN IP addresses. The system
displays a confirmation window prompting the administrator to log
out of the
AP-5131 after the operation completes for the changes
to take effect. Click Yes to continue the operation. Click No to
cancel the configuration file export.
CAUTION For HTTP downloads (exports) to be successful, pop-up messages
must be disabled.
!