User`s manual

51
File Mode
6/12/06 KDU Plus User’s Manual 980548-001 Rev. A
Make your file selection and press the Enter key. The KDU Plus will begin transferring the file
out of the folder and into the printer. The printer should not be printing, calibrating or feeding
media (labels) while a file transfer is in progress. The NUMBER OF BYTES REMAINING
status will decrement until it reaches 0 (zero) and returns to the SELECT FILE TO SEND
screen.
Repeat this process until all the individual files that you need have been transferred.
To exit SEND FILE mode, press the Esc (Escape) key.
To transfer all the stored files in the printer at once as a single process, use the SEND ALL
File Management selection. To start sending all files stored in the KDU Plus to the printer,
select the
> SEND ALL < from the File Management display screen.
When this screen is displayed, press the Enter key again to start the file transfers. The display
will show the file transfer for each file until all files have transferred. Pressing the Esc
(Escape) key at any time, will immediately terminate the file transfer in progress and any files
that have not transferred yet.