User`s manual

Setup Mode

980548-001 Rev. A KDU Plus User’s Manual 6/12/06

Factory Defaults

The factory default settings will be reset by selecting the YES option and pressing the Enter

key.

Exiting Setup Mode

Setup Mode changes are not saved to flash memory until Setup Mode is exited properly by

pressing the Esc (Escape) key until you go into the last selected operational mode or by

selecting an operational mode which exits Setup Mode immediately. All Setup Mode setting

changes are stored in temporary RAM memory. The KDU Plus will save all changes to

permanent memory when properly exiting the Setup Mode. If you power down during Setup

Mode, the KDU Plus will not store your settings.