User`s manual

11
Installation
Operational Modes
6/12/06 KDU Plus User’s Manual 980548-001 Rev. A
Operational Modes
The KDU Plus is factory set to Auto-Detect the attached printer cable type. The KDU Plus
automatically sets the interface to match the attached Zebra printer. The serial port settings
may need to be set for proper operation. See “Port Settings” on page 17. The KDU Plus
defaults to auto detect EPL Forms Mode or ZPL Forms Mode.
The KDU Plus has four basic modes of operation: Setup, Forms, Terminal, and File.
SETUP - After the printer has been attached to the KDU Plus, the KDU Plus can be
reconfigured to support a variety of different interface parameters including operational
modes, serial port settings, and data entry modes. See the Setup Mode chapter for more details.
Turn attached printer ON
Internal
Diagnostics
Auto-Detect
Detect Serial Port
Configuration
Detect EPL / ZPL
Yes
Yes (Default)
No
Operator Selected
Operational Mode
(Auto-Detection - Off)
Forms Mode Terminal Mode
No