User`s manual

Introduction
Controls
6
980548-001 Rev. A KDU Plus User’s Manual 6/12/06
Controls
The KDU Plus has a QWERTY style keyboard that includes special function and navigation
keys to configure the user and communication interfaces. The KDU Plus is designed to
automatically detect your attached Zebra printer and configure the KDU Plus to default
settings. To change and store modifications to the default settings, use the control buttons
shown below.
Setup Key - Press the Setup key to access the ‘CHANGE KDU SETTING’ menus. The setup
options allow the user to change the configuration settings or operational modes. The Setup
key is only active when the KDU Plus is in one of the other three operational modes: Forms,
Terminal and File modes.
Esc Key - The Esc (Escape) key operation and function will vary depending upon the KDU
Plus operational mode.
In the Setup Mode, press the Esc key to exit Setup Mode level. Pressing the Esc key, when at
the top level ‘CHANGE KDU SETTING’ Setup mode, will cause the KDU Plus to exit the
Setup Mode and return to the last configured operation mode set prior to entering the Setup
Mode.
In File Mode, the KDU Plus will exit the file management operation selected or in process.
Note • The Esc key will not cause the KDU Plus exit to the File Management mode/screen.
Press the Setup key to to enter the CHANGE KDU SETTING menu and then select
‘OPERATIONAL MODE’ to change to Forms or Terminal operating modes.
Setup Button
Esc - Escape Key
Enter Key
Navigation
“Arrow” Keys