Reference Guide

Settings

• Also vibrate for calls - Switch on or off.

• Do Not Disturb preferences - Mutes some or all sounds and vibrations.

• Priority only allows - Use to set the priorities for the following:

• Reminders - Switch on or off.

• Events - Switch on or off.

• Alarms - This is always enabled.

• Messages - Choose to allow messages from anyone, starred contacts, any contact, or none. To star

contacts, use the Contacts app.

• Calls - Choose to allow calls from anyone, starred contacts, any contact, or none. To star contacts,

use the Contacts app.

• Repeat callers - Choose whether or not the phone rings if the same person calls again within 15

minutes.

• Block visual disturbances

• Block when screen is on - This option prevents notifications from displaying over the screen

(peeking) while you are actively using the device.

• Block when screen is off - This option prevents notifications from turning on the screen or pulsing

the LED light when a new notification is received while you are not using the device.

• Automatic rules - Choose when to automatically silence the device. Touch a default rule, such as

Weekend or Weeknight, or create your own rule. To create your own rule, tap Add more and then Time

rule.

• Advanced - Touch to display advanced sound options.

• Default notification sound - Touch to select a sound to play for all system notifications.

• Default alarm sound - Touch to select a sound to play for alarms.

• Other sounds and vibrations

• Screen locking sounds - Play a sound when locking and unlocking the screen (default – enabled).

• Charging sounds - Not applicable.

• Touch sounds - Play a sound when making screen selections (default – enabled).

• Vibrate on tap - Vibrate the device when making screen selections (default – disabled).

• Emergency alerts - Touch to configure emergency broadcast settings and notifications.

Setting Device Advertisement

Device Advertisement consists of Inactivity notification and Device paging functionalities. Inactivity

notification is based on the device sensor support (accelerometer). If the device doesn’t have an

accelerometer sensor, only the Device paging option is available.

To access Device Advertisement settings:

1. Go to Settings.

2. Touch Device Advertisement.