Specifications

5 - 12 MC17/MC17A/MC17T/MC17U Product Reference Guide
3. Carefully press and briefly hold a pointing instrument on the center of each target that appears on the
screen.
4. Repeat as the target moves around the screen, then tap the screen to continue.
Waking the MC17 Series
The wake up conditions define what actions wake up the mobile computer after it has gone into suspend mode.
The mobile computer can go into suspend mode automatically by control panel time-out settings. These
settings are configurable and the factory default settings are shown in Table 5-3. To set the wake up conditions
select Start > Control Panel > Power icon > Wakeup tab.
Figure 5-18 Wakeup Tab
Table 5-3 Wakeup Default Settings
Condition for Wakeup Automatic Time-out
AC power is applied. Yes
Mobile computer is inserted into a cradle. Yes
Mobile computer is removed from a cradle. Yes
Mobile computer is connected to a USB device. Yes
Mobile computer is disconnected from a USB device. Yes
A key is pressed. Yes
Trigger is pressed. Yes
Screen Tap (MC17T MC17U only) No