Specifications

CHAPTER 5 USING THE WINDOWS CE
DESKTOP
Introduction
The MC17 and MC17A runs Windows CE 5.0 operating system and the operating system is only available for
configuration when connected to a host computer via ActiveSync. Since these devices are non-touch and has
a limited keypad, control is only available using remote control software.
The MC17T and MC17U are touch enabled devices and control is available using the user interface (UI).
ActiveSync
See Chapter 4, ActiveSync for information on downloading and installing ActiveSync.
Remote Control Software
To control the device from a host computer, a remote control software application, such as ActiveSync Remote
Display, is required.
Download WindowsMobilePowerToys.msi application from the Microsoft web site: http://www.microsoft.com.
Following the instructions with the software to install the application on a host computer.
Connection to Host Computer
To connect the mobile computer to a host computer:
1. Ensure that ActiveSync is installed properly on the host computer. See Chapter 4, ActiveSync for more
information.
2. Using a T8 Torx drive, remove the two Torx screws securing the access panel to the back housing.