Specifications

Wireless Applications 3 - 3
1. Configure RD to download packages from a FTP server that is accessible from the staging network. This
may require MSP bar codes, etc.
2. The Out of Box magic profile for the MC17 devices automatically attempts to connect to a wireless network
with an ESSID of “101”. This should be the same ESSID of the staging network.
3. Place the WCS Options Registry file (created using the alternate Fusion based device), on the staging
network's FTP server.
4. The MC17 should download the WCS Options Registry file from the staging network and configure
802.11d mode and the country code.
5. The MC17 should perform a cold boot so that the new configuration takes effect.
Connect to the Non-802.11d Network
Since the MC17 is now setup to not use 802.11d and is configured with the correct country code for the
network, the normal RD procedure should be used from this point forward.
Wireless Application on the MC17T/MC17U
To configure the mobile computer, a set of wireless applications provide the user with the tools to configure and
test the wireless radio embedded the mobile computer. The following wireless applications are available on the
task tray from the Wireless Application menu:
• Wireless Status
• Wireless Diagnostics
• Find WLANs
• Manage Profiles
• Options
• Log On/Off
• Enable/Disable Radio.
Refer to the Wireless Fusion Enterprise Mobility Suite User Guide for Version X.XX, for information on
configuring wireless profiles, where X.XX indicates the Fusion version. To determine the Fusion version see
Fusion Software on page xiii.
Close all applications to access the Windows CE 5.0 desktop (if required).
By default, the taskbar is set to hide below the screen. To display the Taskbar place the cursor over the portion
of the Taskbar that is visible (a thin gray line at the bottom of the screen). The Taskbar automatically appears.
Tap the Signal Strength icon to display the Wireless Application menu.
NOTE The Windows CE 5.0 desktop may not be visible because the App Launcher application is active. To view
the desktop, close all running applications.