Specifications

1 - 8 MC17/MC17A/MC17T/MC17U Product Reference Guide
Figure 1-8 Replace Battery Cover
10. Inspect the position of the battery cover with the main housing. If the door is misaligned, remove battery
and black rubber pad and re-install.
Figure 1-9 Inspect Battery Door Alignment
11. Secure the battery cover with the Torx screw using a T8 Torx drive.
Figure 1-10 Secure Battery Cover with Screw
12. After installing a new battery, wait approximately one minute before inserting the mobile computer into a
cradle.
Battery Door
Properly Aligned