User Manual

RS-232 INTERFACE 4 - 11

Parity

A parity check bit is the most significant bit of each ASCII coded character. Select the parity type according to

host device requirements.

•

Select Odd parity and the parity bit value is set to 0 or 1, based on data, to ensure that an odd number of

1 bits are contained in the coded character.

•

Select Even parity and the parity bit value is set to 0 or 1, based on data, to ensure that an even number

of 1 bits are contained in the coded character.

•

Select None when no parity bit is required.

NOTE This parameter applies only to scanners branded with a silver logo .

NOTE Parity of None is not valid when Data Bits is set to 7-bit.

Odd

Even

*None