User Manual

CHAPTER 4 RS-232 INTERFACE
Introduction
This chapter provides instructions for programming the scanner to interface with an RS-232 host interface. The
RS-232 interface is used to attach the scanner to point-of-sale devices, host computers, or other devices with
an available RS-232 port (i.e., COM port).
If the particular host is not listed in Table 4-2, set the communication parameters to match the host device.
Refer to the documentation for the host device.
Throughout the programming bar code menus, default values are indicated with asterisks (
*).
NOTE This scanner uses TTL RS-232 signal levels, which interface with most system architectures. For system
architectures requiring RS-232C signal levels, we offer different cables providing the TTL to RS-232C
conversion. Contact support for more information.
*Baud Rate 9600
Feature/Option
*Indicates Default