User Manual

3 - 16 LS2208 Product Reference Guide
Optional USB Parameters
If the configured settings are changed or not saved after restarting the system, scan the following bar codes to
override USB interface defaults.
Scan these bar codes after setting defaults and before configuring the scanner.
TGCS (IBM) USB Ignore Beep Directive
The host can send a beep request to the scanner. When this parameter is enabled, the request is not sent to
the attached scanner. All directives are still acknowledged to the USB host as if processed.
TGCS (IBM) USB Ignore Bar Code Configuration Directive
The host has the ability to enable/disable code types. When this parameter is enabled, the request is not sent
to the attached scanner. All directives are still acknowledged to the USB host as if processed.
*Disable (Acknowledge Beep)
Enable (Ignore Beep)
*Disable (Acknowledge Bar Code Configuration)
Enable (Ignore Bar Code Configuration)