User Manual

A - 2 LS2208 Product Reference Guide
TGCS (IBM) USB Ignore Bar Code Configuration
Directive
N/A Disable 3-16
RS-232 Host Parameters
RS-232 Host Types N/A Standard 4-6
Baud Rate N/A 9600 4-8
Stop Bit Select N/A 1 Stop Bit 4-9
Data Bits (ASCII Format) N/A 8-bit 4-10
Parity Type N/A None 4-11
Check Receive Errors N/A Enable 4-12
Hardware Handshaking N/A None 4-12
Software Handshaking N/A None 4-14
Host Serial Response Time-out N/A 2 sec 4-16
RTS Line State N/A Low RTS 4-17
Beep on <BEL> N/A Disable 4-17
Intercharacter Delay N/A 0 msec 4-18
Nixdorf Beep/LED Options N/A Normal Operation 4-19
Ignore Unknown Characters N/A Send Bar Code 4-19
IBM 468X/469X Host Parameters
Port Address N/A None Selected 5-4
Convert Unknown to Code 39 N/A Disable 5-5
Ignore Beep N/A Enable 5-5
Ignore Bar Code Configuration N/A Enable 5-6
Keyboard Wedge Host Parameters
Keyboard Wedge Host Type N/A IBM PC/AT & IBM PC
Compatibles
6-4
Ignore Unknown Characters N/A Send 6-4
Keystroke Delay N/A No Delay 6-5
Intra-Keystroke Delay N/A Disable 6-5
Alternate Numeric Keypad Emulation N/A Disable 6-6
Quick Keypad Emulation N/A Disable 6-6
Table A-1 Standard Default Parameters Table (Continued)
Parameter
Parameter
Number
Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.