User Manual

11 - 4 LS2208 Product Reference Guide
Technical Specifications
Table 11-2 Technical Specifications
Item Description
Power Requirements Use only a Zebra-approved power supply
(p/n PWRS-14000-253R, PWRS-14000-256R, PWRS-14000-257R, or
PWRS-14000-258R) output rated 5 VDVC and minimum 650mA. The power
supply is certified to EN60950 with SELV outputs. Use of alternative power supply
will invalidate any approval given to this device and may be dangerous.
Voltage and Current 5VDC ± 10%
< 175 mA scanning
< 90 mA standby
< 2.5 mA USB suspend
< 4.0 mA low power mode* (when enabled, RS-232 and keyboard wedge only)
*(Scanners branded with a silver logo
)
Power Source Depending on host:
• Host powered
• External power supply
Decode Capability UPC/EAN, UPC/EAN with supplementals, UCC/EAN, JAN 8 & 13, 128, Code 39,
Code 39 Full ASCII, Code 39 Trioptic, Codabar (NW7), Interleaved 2 of 5,
Discrete 2 of 5, Code 128, Code 93, MSI, Code 11, UCC/EAN, GS1 DataBar,
Code 32, Coupon Code, Bookland EAN, IATA
Beeper Operation User-selectable: Enable, Disable
Beeper Volume User-selectable: three levels
Beeper Tone User-selectable: three tones
Scan Repetition Rate 100 ± 5 scans/second
Yaw Tolerance ± 10° from nominal
Pitch Tolerance ± 65° from nominal
Roll Tolerance ± 60° from nominal
Print Contrast Minimum 20% minimum reflectance differential, measured at 650 nm.
Ambient Light Tolerance Tolerant to typical artificial indoor and natural outdoor (direct sunlight) lighting
conditions. Fluorescent, Incandescent, Mercury Vapor, Sodium Vapor, LED: 450
Ft Candles (4,844 Lux) Sunlight: 8000 Ft Candles (86,111 Lux)
Note: LED lighting with high AC ripple content can impact scanning performance.
Durability 5 ft (1.5 m) drops to concrete
Operating Temperature 32° to 120° F (0° to 50° C)
Storage Temperature -40° to 140° F (-40° to 60° C)
Humidity 5% to 95% (non-condensing)