User Manual

MAINTENANCE, TROUBLESHOOTING & TECHNICAL SPECIFICATIONS 11 - 3
Scanned data is incorrectly
displayed on the host.
Scanner is not
programmed to work with
the host. Check scanner
host type parameters or
editing options.
Be sure proper host is selected. (See the
host chapter for your scanner.)
For RS-232, ensure the scanner’s
communication parameters match the host’s
settings.
For a USB HID keyboard or a keyboard
wedge configuration, ensure the system is
programmed for the correct keyboard type
and language, and the CAPS LOCK key is in
the correct state.
Be sure editing options (e.g., ADF, UPC-E to
UPC-A Conversion) are properly
programmed.
Table 11-1 Troubleshooting (Continued)
Problem Possible Causes Possible Solutions
NOTE If after performing these checks the symbol still does not scan, contact your distributor or support. See
page xvi for contact information.