User Manual

7 - 8 LS2208 Product Reference Guide
Direct Decode Indicator
Parameter # 859
Scan a bar code below to select optional blinking of the laser line upon a successful decode if you continue to
hold the trigger. If you release the trigger upon decode, the blinking does not occur, or partial blinks may
occur. This allows you to choose additional feedback for a successful decode by holding the trigger, or to
continue to scan as normal.
Suppress Power-up Beeps
Parameter # 721
Select whether or not to suppress the scanner’s power-up beeps.
NOTE This parameter applies only to scanners branded with a silver logo , and only when the
scanner is in Level Trigger Mode.
*Disable Direct Decode Indicator
(0)
1 Blink
(1)
2 Blinks
(2)
Suppress Power-up Beeps
(1)
*Do Not Suppress Power-up Beeps
(0)