User Manual

7 - 2 LS2208 Product Reference Guide
Errors While Scanning
Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.
User Preferences Default Parameters
Table 7-1 lists the defaults for user preferences parameters. To change any option, scan the appropriate bar
code(s) provided in the User Preferences section beginning on page 7-4.
NOTE See Appendix A, STANDARD DEFAULT PARAMETERS for all user preferences, hosts, symbologies, and
miscellaneous default parameters.
Table 7-1 User Preferences Default Table
Parameter
Parameter
Number
Default
Page
Number
User Preferences
Set Defaults All Defaults 7-4
Out Of Box Experience N/A N/A 7-5
Report Version N/A N/A 7-6
Parameter Bar Code Scanning 236 Enable 7-7
Beep After Good Decode 56 Enable 7-7
Direct Decode Indicator 859 Disable 7-8
Suppress Power-up Beeps 721 Do Not Suppress 7-8
Beeper Tone 145 Medium 7-9
Beeper Volume 140 High 7-10
Beeper Duration 628 Medium 7-11
Hand-Held Trigger Mode 138 Standard (Level) 7-12
Hands-Free Trigger Mode 630 Enable 7-13
Power Mode 128 Continuous On 7-14
Time Delay to Low Power Mode 146 1 hour 7-15
Continuous Bar Code Read 649 Disable 7-17
Unique Bar Code Reporting 723 Enable 7-17
Decode Session Timeout 136 3.0 sec 7-18
Time-out Between Decodes, Same Symbol 137 0.6 sec 7-19
Time-out Between Decodes, Different Symbols 144 0.2 sec 7-19