Specifications

103
Kiosk Design Considerations
Design Your Own Mounting
12/23/2009 KR403 Integrators Guide P1016701-001
Design Your Own Mounting
The illustration below gives an example of a printer-mounting shelf.
Example of a Simple Shelf For Fastening a Standard Printer
Using Quick-fit Hubs and a Leaf Spring Retainer
Additional space is required for paper loading and service access. Consider mounting the
printer on a movable platform so that the printer can be maintained outside the printer
enclosure.
Note • We recommend making the output slot 97 mm wide. This width should accommodate
all paper widths that the KR403 printers can handle.
Caution • NEVER use screws that go into the printer more than 4 mm! This will destroy the
electronics inside.
20 mm
Paper width
+ 10 mm
44 mm
10 mm
12 mm
6.5 mm
10 mm
90.8 mm
132 mm
156 mm
Leaf spring
01473-000
11 mm
10 mm
1
.
5
m
m
Add material for corner radius
Min. 100 mm
Center
10 mm