Specifications

21
Prototype Receipt
Designing the Prototype Receipt
10/29/2010 Software Integrator Guide P1026208-001 Rev. B
Designing the Prototype Receipt
It is recommended that you use a sketch or mock-up to do your first receipt design. This
will allow you to move through this tutorial with a minimum of delays and backtracking.
Figure 3-1 • Prototype Receipt Design Procedure
Begin Designing
Prototype Receipt
using Zebra
Designer
New Receipt: Printer Properties
Select your media (Stocks)
Set Receipt/Label Options
- Paper Format (mm -recommended)
- Set Media Width and Length only
Import Logo
Graphics First
Import Graphic using Picture Tool
- Position Graphic on Receipt
- Right Click -Select Properties
- See ‘Fit’ pull-down menu in upper right corner
to scale graphic
Test
Logo Print
Quality
Poor or Distorted
Graphic(s):
Modify Graphics
Add Line Graphics Add Bar Code(s)
Adjust Print
Speed
Ladder Bar Code
Reduce Print
Speed to 3 ips
(76.2 mm/s)
Only using
Picket Fence
Bar Code
Orientations
Fail
Pass
Add Text
(Fixed Fields only)
1. Use ZEBRA 0 font, the Unicode Swiss
721 fonts for Pan-EMEA character sets,
or another TrueType Fonts for the most
design flexibility
2. Variable Text and Serialized data should
be added by kiosk application only.
Test Print
Print Is Not Clear.
Adjust Size or
Change Font or
Font Style.
Hint: Adjust Size in small increments of
1/10 pt while checking printed quality.
Adjust Receipt
Length to Match
Typical Label
Good
Poor
Hint: The kiosk printer has a variable length
mode to automatically print objects that
extend beyond the end of the set receipt
length up to the maximum receipt length
Phase 1
Complete
Test Print and
Save Receipt