Specifications

Windows Driver
Properties
20
P1028248-001 Rev. A KR203 Software Integrator Guide 8/6/2010
Device Settings
The Device Settings Tab is where the main features of the printer are configured.
Form To Tray Assignment – Selects the media width and page length. The driver
supports page length from 92mm to 600mm with the default set to 400mm. The driver
supports page widths of 58, 60, 80, and 82.5mm. The driver incorporates a side
margin of 2mm. For suggestions on making custom forms, refer to "Setup Printer
Forms in Windows XP and Vista" on page C-1, and "Setup Printer Forms in Windows
7" on page C-3.
Printer Settings – Darkness sets the level of the black on the page. The range of the
darkness setting is from 0 to 30 with the default setting at 20.
Max Print Speed is how fast the page will print. The range of the max print speed
setting is from 75mm to 152mm/sec with the default setting at 152 mm/s.
Document Settings – Media Tracking sets continuous, variable length, or mark
sensing with the default set to variable length.
When media tracking is set to continuous, the driver sends the full page size to the
printer (Page Mode). The page length will always be the same as the selected paper