Specifications

53
Accessories
Universal Roll Holder – P1014125
10/26/2010 KR203 Hardware Integrator Guide P1028247-001 Rev. B
Universal Roll Holder – P1014125
This roll holder can be fitted on the right or left side of the printer. The arm can be set at
three different angles. This makes make integration in the kiosk easy.
• 58mm, 60mm, 80mm, and 82.5mm media widths can be used without
adjustments.
• The universal roll holder supports up to 200mm rolls in the ‘high’ and ‘low’ arm
positions, and 250mm rolls in the ‘under’ position with clearance for cabling.
• No other accessories are required for the ‘high’ arm position, while the Printer
Mounting Plate (page 52) with the inertia dampening spring guide and cable
shield is needed in the two other positions.
• The optional media roll low sensor (page 50) can be added to the roll support.
Mounts on
either side