Specifications

41
Media
Loading Media
10/26/2010 KR203 Hardware Integrator Guide P1028247-001 Rev. B
Manual Media Loading
Manual media loading is intended for maintenance operations, such as printhead cleaning
and removing media jams. Please use the automated media loading procedure (page 40)
to load media for normal operations.
1. Open the printhead.
2. Insert the media through the rear of the printer and under the open printhead. Pull the
media just past the cutter and platen (drive) roller. Do not insert the media past the
presenter or rest the media on top of the presenter as it will not feed properly and an
error will occur.
3. Close the printhead. Push down on the push-bar to securely latch the printhead
closed.
4. The printer will then feed, cut, and eject a blank receipt and then go to a ready state
(solid green status indicator).
Figure 5-10 • Manual Media Loading