Specifications

Media
Media Guide
34
P1028247-001 Rev. B KR203 Hardware Integrator Guide 10/26/2010
Media Guide
The media guide is a required accessory and must be installed for the printer to work
properly. The media guide is available in four widths as shown below:
A printer demo kit (Part No. P1021954) is available for the KR203 printer that includes all
four media guides plus other accessories to complete your installation and operate the
printer.
Installing the Media Guide
A calibration routine is required after installing the appropriate media guide. See "Media
Guide Calibration" on page 35 for details.
Caution • The printhead becomes hot while printing. To protect from damaging the
printhead and risk of personal injury, avoid touching the printhead. Use only the cleaning
pen to perform maintenance.
Caution • Always disable printer power by un-plugging the printer from the kiosk power
supply or turning off the printer and/or kiosk power.
1. Remove the screw securing the media guide.
2. Open the printhead.
Figure 5-4 • Media Guide
Width (mm) Part Number Width (mm) Part Number
58 09170-058-3 80 09170-080-3
60 09170-060-3 82.5 09170-082-3