User guide

42
iMZ Series User Guide
Specifications
Note.- Printer specications are subject to change without notice.
Printing Specications
Parameter
iMZ220 iMZ320
Print Width Up to 1.89 in. (48,0 mm) Up to 2.9 in. (71,2 mm)
Print Speed (max) 3” per second (76,2 mm/second)
Print Speed (normal) 2” per second (5,0 mm/second)
Print Head Life,
calculated
1 x 10
6
in. (25,4 Km) nominal
Print Density 203 dots/inch (8 dots/mm)
Printhead Burn
Line to Tear Edge
0.2 in. (5,08 mm)
Memory and Communications Specications, iMZ series
Flash Memory
128 MB
SRAM
128 MB
Standard
Communications
USB 2.0 Full Speed Interface (12 Mbps)
Optional Wireless
Communications
Standard Bluetooth compatible module
Optional 802.11a/b/g/n SRRF module
Dual radio option (802.11a/b/g/n & BT 3.0 available in
Q1-2013
Media Specications
Parameter
iMZ220 iMZ320
Width
2.0 ± .03 in.
(50,8 ±0,8 mm)
3.0 ± .03 in.
(76,2 mm ±0,8 mm)
Max.
Printable
Area
Width
Length
1.9” (48,3 mm) 2.9” (73,7 mm)
Maximum length will vary with the size of loaded applications.
Refer to the configuration label for actual maximum label size.
Label Thickness .002 in to .004 in (0,050 mm to 0,102 mm)
Max. Media Roll
dia.
1.88 in. (47,8 mm) O.D.
Label Inner Core
Diameter
0.40 to 0.75 in.. (10,2 to 19,0 mm)
Black Mark
Dimensions
The reflective media black marks should extend past the
centerline of the roll on the front side of the media.
Minimum mark width: 0.59 in. (15 mm) perpendicular
to edge of media, centered within the width of the roll.
Mark length: 0.19 - 0.24 in. (3,0-6,0 mm) parallel to
edge of media. (See Fig. 7)
Use Zebra brand direct thermal or UV resistant coated media that is outside wound. Refer to Appendix
“B” for more details.