User guide

16
iMZ Series User Guide
Figure 7: Media Black Bar Dimensions
Using Pre-Printed Receipt Media
iMZ series printers support alignment of pre-printed receipts
by using the out of paper sensor located near the printhead.
Please be aware of the following factors:
1) Note the black bar location and dimensions as detailed
below and in the Specifications section of this manual.
2) Complete information on using pre-printed media
can be found in the FORM command topic in the CPCL
Programming Manual. The CPCL manual is available
on the iMZ Product CD or on the Zebra Web site at
http://www.zebra.com/manuals
.
0.19 - 0.24 in.
(3,0 - 6,0 mm)
0.59 in.
(15 mm)
3 inch media
(76.2 mm)
0.19 - 0.24 in.
(3,0 - 6,0 mm)
0.59 in.
(15 mm)
3 inch media
(76.2 mm)