User guide

13
iMZ Series User Guide
iMZ Series Quad Power Station
The iMZ series Quad Power Station is designed to dock and
charge up to four iMZ series printers of either type simultane-
ously.
1. Ensure that the Power Station has been installed properly
per its instruction manual. Ensure that the power supply
is properly connected and its power indicator light is on.
2. Slide a printer into any one of the four docking bays as
shown in Figure 5.
NOTES: If you are using a shoulder strap, ensure it is pulled away
from the printer when installing in the Power Station.
Do not use the printer when it is installled in the Power
Station
The printer’s charge status indicator will turn amber if the
printer is properly inserted and the battery is less than
90% charged.
The printer’s charge indicators will allow you to monitor the
Figure 5: iMZ Series Quad Power Station
Green (Power)
Indicator
Slide Printer into docking bay
iMZ220 Printer
iMZ320 Printer
Amber/Green (Charge)
Indicator