User guide

37
iMZ Series User Guide
Resetting an iMZ Series Printer
If the printer has locked up and is not responding to any operator inputs
or external commands, either from a connected terminal or from a linked
LAN, you can perform a forced reset as follows:
Press and hold the Power (on/off) button for approx. 4.5 sec-
onds until the printer shuts down.
Information On Back Of Printer
The printer build date is identied by the Year and Week codes of the printer serial number label
located on the bottom of the unit. (See Figure 17 below).
Figure 17: Determining Your Printer Version (iIMZ320 illustrated)
UID#
PLACE BAR CODE HERE
XXXXSYYWWNNNNNS/N:
PLACE BAR CODE HERE
XXX-XXXXXXXX-XXPCC:
Serial Number
encoded in
128 symbology
Product Configuration
Code (PCC)
encoded in
128 symbology
Customer Code
2 Digit
Product Code
2 Digit
UID Number
encoded in
Datamatrix
ECC 200
symbology
Contains FC C ID: I28M D-ZBR4WA; IC ID:3 798B-ZBR4W A
ZBR4
Date Code
YYWWNNNNN
Sequential number
(00001-99999),resets
each week
Week (01-52)
Last two digits
of year (00-99)
Site
1 Digit