Specifications
Table Of Contents
- Table of Contents
- INTRODUCTION - Volume One
- Welcome to ZPL II Programming for X.10 Firmware
- SECTION ONE - ZPL II Programming Commands
- Using Section One: ZPL II Command Reference
- ^A - Scalable/Bitmapped Font
- ^A@ - Use Font Name to Call Font
- ^B1 - Code 11 Bar Code
- ^B2 - Interleaved 2 of 5 Bar Code
- ^B3 - Code 39 Bar Code
- ^B4 - Code 49 Bar Code
- ^B7 - PDF417 Bar Code
- ^B8 - EAN-8 Bar Code
- ^B9 - UPC-E Bar Code
- ^BA - Code 93 Bar Code
- ^BB - CODABLOCK Bar Code
- ^BC - Code 128 Bar Code (Subsets A, B, and C)
- ^BD - UPS MaxiCode Bar Code
- ^BE - EAN-13 Bar Code
- ^BF - Micro-PDF417 Bar Code
- ^BI - Industrial 2 of 5 Bar Code
- ^BJ - Standard 2 of 5 Bar Code
- ^BK - ANSI Codabar
- ^BL - LOGMARS Bar Code
- ^BM - MSI Bar Code
- ^BP - Plessey Bar Code
- ^BQ - QR Code Bar Code
- ^BS - UPC/EAN Extensions
- ^BU - UPC-A Bar Code
- ^BX - Data Matrix Bar Code
- ^BY - Bar Code Field Default
- ^BZ - POSTNET Bar Code
- ^CC ~CC - Change Caret
- ^CD ~CD - Change Delimiter
- ^CF - Change Alphanumeric Default Font
- ^CI - Change International Font
- ^CM - Change Memory Letter Designation
- ^CO - Cache On
- ^CT ~CT - Change Tilde
- ^CV - Code Validation
- ^CW - Font Identifier
- ~DB - Download Bitmap Font
- ~DE - Download Encoding
- ^DF - Download Format
- ~DG - Download Graphics
- ~DN - Abort Download Graphic
- ~DS - Download Scalable Font
- ~DT - Download TrueType Font
- ~DU - Download Unbounded TrueType Font
- ~DY - Download Graphics
- ~EF - Erase Stored Formats
- ~EG - Erase Download Graphics
- ^FB - Field Block
- ^FC - Field Clock (for Real Time Clock)
- ^FD - Field Data
- ^FH - Field Hexadecimal Indicator
- ^FM - Multiple Field Origin Locations
- ^FN - Field Number
- ^FO - Field Origin
- ^FP - Field Parameter
- ^FR - Field Reverse Print
- ^FS - Field Separator
- ^FT - Field Typeset
- ^FV - Field Variable
- ^FW - Field Orientation
- ^FX - Comment
- ^GB - Graphic Box
- ^GC - Graphic Circle
- ^GD - Graphic Diagonal Line
- ^GE - Graphic Ellipse
- ^GF - Graphic Field
- ^GS - Graphic Symbol
- ~HB - Battery Status
- ^HG - Host Graphic
- ~HI - Host Identification
- ~HM - Host Memory Status
- ~HS - Host Status Return
- ~HU - Host Unsolicited
- ^HW - Host Directory List
- ^HY - Upload Graphics
- ^HZA - Display All Description Information
- ^HZF - Format Parameter Setting Information
- ^HZL - Object Directory Listing Information
- ^HZO - Individual Object Data Information
- ^HZR - Status Information
- ^ID - Object Delete
- ^IL - Image Load
- ^IM - Image Move
- ^IS - Image Save
- ~JA - Cancel All
- ^JB - Initialize Flash Memory
- ~JB - Reset Optional Memory
- ^JC - Set Media Sensor Calibration
- ~JD - Enable Communications Diagnostics
- ~JE - Disable Diagnostics
- ~JF - Set Battery Condition
- ~JG - Graphing Sensor Calibration
- ^JJ - Set Auxiliary Port
- ~JL - Set Label Length
- ^JM - Set Dots per Millimeter
- ~JN - Head Test Fatal
- ~JO - Head Test Non-fatal
- ~JP - Pause and Cancel Format
- ~JR - Power On Reset
- ~JS - Change Backfeed Sequence
- ^JT - Head Test Interval
- ^JU - Configuration Update
- ^JW - Set Ribbon Tension
- ~JX - Cancel Current Partially Input Format
- ^JZ - Reprint After Error
- ~KB - Kill Battery (Battery Discharge Mode)
- ^KD - Date/Time Format (for Real Time Clock)
- ^KL - Define Language
- ^KN - Define Printer Name
- ^KP - Define Password
- ^LH - Label Home
- ^LL - Label Length
- ^LR - Label Reverse Print
- ^LS - Label Shift
- ^LT - Label Top
- ^MC - Map Clear
- ^MD - Media Darkness
- ^MF - Media Feed
- ^ML - Maximum Label Length
- ^MM - Print Mode
- ^MN - Media Tracking
- ^MP - Mode Protection
- ^MT - Media Type
- ^MU - Set Units of Measurement
- ~NC - Network Connect
- ^NI - Network ID Number
- ~NR - Set All Network Printers Transparent
- ~NT - Set Currently Connected Printer Transparent
- ^PF - Slew Given Number of Dot Rows
- ^PH ~PH - Slew to Home Position
- ^PM - Printing Mirror Image of Label
- ^PO - Print Orientation
- ^PP ~PP - Programmable Pause
- ^PQ - Print Quantity
- ^PR - Print Rate
- ~PR - Applicator Reprint
- ~PS - Print Start
- ^PW - Print Width
- ~RO - Reset Advanced Counter
- ^SC - Set Communications
- ~SD - Set Darkness
- ^SE - Select Encoding
- ^SF - Serialization Field (with a Standard ^FD String)
- ^SL - Set Mode/Language (for Real Time Clock)
- ^SN - Serialization Data
- ^SO - Set Offset (for Real Time Clock)
- ^SP - Start Print
- ^SQ - Halt ZebraNet ALERT
- ^SR - Set Printhead Resistance
- ^SS - Set Media Sensors
- ^ST - Set Time/Date (for Real Time Clock)
- ^SX - Set ZebraNet ALERT
- ^SZ - Set ZPL
- ~TA - Tear-off Adjust Position
- ^TO - Transfer Object
- ~WC - Print Configuration Label
- ^WD - Print Directory Label
- ^XA - Start Format
- ^XB - Suppress Backfeed
- ^XF - Recall Format
- ^XG - Recall Graphic
- ^XZ - End Format
- ^ZZ - Printer Sleep
^B7
PDF417 Bar Code
Description: The ^B7 command is a two-dimensional, multi-row, continuous
stacked symbology. PDF417 is capable of encoding over 1,000 characters per bar
code. It is ideally suited for applications where large amounts of information are
required at the time the bar code is read.
The code consists of 3 to 90 stacked rows. Each row consists of start and stop
patterns and symbol characters called “code-words.” A “code-word” consists of four
bars and four spaces. A three code-word minimum is required per row.
•
PDF417 has a fixed print ratio.
Format: ^B7o,h,s,c,r,t
Parameters:
o = orientation
Accepted Values:
N = normal
R = rotated 90 degrees (clockwise)
I = inverted 180 degrees
B = read from bottom up, 270 degrees
Default Value: Current ^FW value
h = bar code height for individual rows
Accepted Values: 1 to height of label
Default Value: Value set by ^BY
This number multiplied by the module equals the height of the
individual rows in dots. 1 is not a recommended value.
s = security level
Accepted Values: 1 to 8 (error detection and correction)
Default value: 0 (error detection only)
This determines the number of error detection and correction code-
words to be generated for the symbol. The default level provides only
error detection without correction. Increasing the security level adds
increasing levels of error correction and increases the symbol size.
c = number of data columns to encode
Accepted Values: 1to30
Default Value: 1:2 (row-to-column aspect ratio)
The user can specify number of code-word columns given control over
the width of the symbol.
ZPL II Programming Guide Volume One: Command Reference for X.10
21