Specifications

33
ZPL Commands
^B7
9/15/06 ZPL II Programming Guide 45541L-004 Rev. A
Comments Noted in this bulleted list:
• If both columns and rows are specified, their product must be less than 928.
• No symbol is printed if the product of columns and rows is greater than 928.
• No symbol is printed if total code-words are greater than the product of columns and rows.
• Serialization is not allowed with this bar code.
• The truncation feature can be used in situations where label damage is not likely. The right
row indicators and stop pattern is reduced to a single module bar width. The difference
between a non truncated and a truncated bar code is shown in the previous examples.
Example • This is an example of a PDF417 without and with truncation selected:
Example • This example shows the ^B7 command used with field hex (^FH) characters:
^XA
^FO50,50^BY3,3.0^B7N,8,5,7,21,N
^FH_^FD[)>_1E06_1DP12345678_1DQ160
_1D1JUN123456789A2B4C6D8E_1D20LA6-987
_1D21L54321 ZES_1D15KG1155
_1DBSC151208_1D7Q10GT_1E_04^FS
^XZ
ZPL II CODE
GENERATED LABEL