Specifications

339
Wireless Commands
^WS
9/15/06 ZPL II Programming Guide 45541L-004 Rev. A
^WS
Set Wireless Card Values
Description Use this command to set the wireless card values for ESSID, Operating Mode,
and Card Preamble.
Format ^WSe,o,p
The following table identifies the parameters for this format.
Parameters Details
e =ESSID value Accepted Values: Any value up to 32 characters, including all ASCII and
Extended ASCII characters, including the space character. When this
parameter is left blank, the ESSID is not changed.
Default Value: 125
o = operating mode Accepted Values: I (Infrastructure), A (Adhoc)
Default Value: I
p = wireless card
preamble
Accepted Values: L (Long), S (Short)
Default Value: L