Specifications

329
Wireless Commands
^NW
9/15/06 ZPL II Programming Guide 45541L-004 Rev. A
^NW
Set Web Authentication Timeout Value
Description Use this command to set the timeout value for the printer home page. The
printer will prompt for the printer password only the first time that certain screens are accessed
until 1) the web authentication timeout value is reached (default value is 5 minutes) or
2) the printer is reset. At that time, the printer will prompt for the password again.
Format
^NWa
The following table identifies the parameters for this format.
Parameters Details
a = timeout value
The timeout value in minutes for an IP address to be authenticated to the printer
web pages.
Accepted Values: 0 (no secure pages can be accessed without entering the
printer password) to 255 minutes
Default Value: 5