Specifications

Wireless Commands
^NP
326
45541L-004 Rev. A ZPL II Programming Guide 9/15/06
^NP
Set Primary/Secondary Device
Description Use this command to specify whether to use the printer’s or the print server’s
LAN/WLAN settings at boot time. The default is to use the printer’s settings.
When the printer is set as the primary device, you can set it up using ZPL commands or the
SetWLAN utility, and any wired print server inserted into the printer will get these settings.
Format
^NPa
The following table identifies the parameters for this format.
Parameters Details
a = device to use as
primary
Accepted Values: P (PRINTER), M (MPS/PRINTSERVER)