Specifications

Wireless Commands
^NB
324
45541L-004 Rev. A ZPL II Programming Guide 9/15/06
^NB
Search for Wired Print Server during Network Boot
Description Use this command to tell the printer whether to search for a wired print server
at bootup. Table 15 shows the results of this check.
Format
^NBa
The following table identifies the parameters for this format.
Table 15 • Results of Check for Wired Print Server
Wired Print
Server
Connected?
Check for Wired
Print Server?
Results
Yes Skip The printer does not check for or acknowledge
the wired print server. The Wireless or Wireless
Plus print server is used as the primary print
server.
Yes Check The printer checks for a wired print server. If the
printer detects the wired print server, it uses it as
the primary print server. If the printer does not
detect the wired print server, the Wireless or
Wireless Plus print server is used as the primary
print server.
No Skip The printer does not check for a wired print
server. The Wireless or Wireless Plus print server
is used as the primary print server.
No Check During bootup, the printer tries for 70 seconds to
detect a wired print server. Because a wired print
server is not connected, the printer uses the
Wireless or Wireless Plus print server as the
primary print server.
Parameters Details
a = check for wired print
server at boot time
Accepted Values: C (CHECK), S (SKIP CHECK)
Default Value: S