Specifications

RFID Commands
^WT
320
45541L-004 Rev. A ZPL II Programming Guide 9/15/06
For the R110Xi HF:
v = reverse the data order
This parameter is not used in the R2844-Z.
For the R110Xi HF:
Reverses the data order.
Accepted values:
N = Do not reverse the data order (Most significant byte first for Tag*It
and PicoTag. Last significant byte first for I*code and ISO 15693)
Y = Reverse the data order
Default value: N
For other supported
printers:
v = verify valid data
For other supported printers:
For reliability, some manufacturers encode tags with known data (such as
A5A5). This parameter flags whether the preprogrammed data is verified.
(Same function as the
^WV command.)
Accepted values:
N = Do not verify
Y = Verify valid data before writing
Default value: N
Parameters Details
Example • This sample encodes data “RFIDRFID” and will try writing up to five times, if
necessary.
^XA
^WT,5^FDRFIDRFID^FS
^XZ